Step-by-Step Guide: Resetting Epson ET2720, ET2726 with Error E-11 Code ‘The Ink Pad Needs Service – Contact Epson’
If you’re the proud owner of an Epson ET2720 or ET2726 printer, you may encounter an error code E-11 displaying the message “the ink pad needs service, contact Epson.” This error usually occurs when the ink pad reaches its maximum capacity and requires a reset. Here’s how you can reset your printer and solve this issue:
1. Start by turning off your printer and unplugging it from the power source. This will ensure your safety during the reset process.
2. Next, locate the two red lights on your printer. Press the “power” button while simultaneously holding down the “stop” button until both lights start blinking.
3. Once both lights are flashing, release the “stop” button, but continue holding the “power” button for a few more seconds. This will initiate the reset process.
4. Wait patiently for the printer to complete the reset. You’ll know it’s finished when the lights stop flashing and remain steady.
5. Finally, turn off your printer and unplug it from the power source for a few seconds. Plug it back in and power it on.
By following these steps, you should successfully reset your Epson ET2720 or ET2726 printer and eliminate the error E-11 code. You’ll be able to resume printing without any further hindrances.
Remember, if the error persists after the reset, it’s recommended to get in touch with Epson customer support. They can provide further assistance and guide you through any additional troubleshooting steps that may be required.
Download Epson ET-1111 Resetter
– Epson ET-1111 Resetter For Windows: Download
– Epson ET-1111 Resetter For MAC: Download
How to Reset Epson ET-1111
1. Read Epson ET-1111 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-1111 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-1111 off then on
5. Check Epson ET-1111 Counter
How to reset Epson ET2720, ET2726 Error E-11 code “the ink pad needs service contact epson” on Youtube
– Video How to reset Epson ET2720, ET2726 Error E-11 code “the ink pad needs service contact epson” on YouTube, as of the current time, has received 13220 views with a duration of 1:04, taken from the YouTube channel: youtube.com/@DongBuiPhuong.
Buy Wicreset Serial Key For Epson ET-1111
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
If you’re the proud owner of an Epson ET2720 or ET2726 printer, you may encounter an error code E-11 displaying the message “the ink pad needs service, contact Epson.” This error usually occurs when the ink pad reaches its maximum capacity and requires a reset. Here’s how you can reset your printer and solve this issue:
1. Start by turning off your printer and unplugging it from the power source. This will ensure your safety during the reset process.
2. Next, locate the two red lights on your printer. Press the “power” button while simultaneously holding down the “stop” button until both lights start blinking.
3. Once both lights are flashing, release the “stop” button, but continue holding the “power” button for a few more seconds. This will initiate the reset process.
4. Wait patiently for the printer to complete the reset. You’ll know it’s finished when the lights stop flashing and remain steady.
5. Finally, turn off your printer and unplug it from the power source for a few seconds. Plug it back in and power it on.
By following these steps, you should successfully reset your Epson ET2720 or ET2726 printer and eliminate the error E-11 code. You’ll be able to resume printing without any further hindrances.
Remember, if the error persists after the reset, it’s recommended to get in touch with Epson customer support. They can provide further assistance and guide you through any additional troubleshooting steps that may be required.
Download Epson ET-1111 Resetter
– Epson ET-1111 Resetter For Windows: Download
– Epson ET-1111 Resetter For MAC: Download
How to Reset Epson ET-1111
1. Read Epson ET-1111 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-1111 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-1111 off then on
5. Check Epson ET-1111 Counter
How to reset Epson ET2720, ET2726 Error E-11 code “the ink pad needs service contact epson” on Youtube
– Video How to reset Epson ET2720, ET2726 Error E-11 code “the ink pad needs service contact epson” on YouTube, as of the current time, has received 13220 views with a duration of 1:04, taken from the YouTube channel: youtube.com/@DongBuiPhuong.
Buy Wicreset Serial Key For Epson ET-1111
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien