Guide: Removing Missing Lines through Head Cleaning for Epson M1120 and ET-M1120 (NPD6056)
Head cleaning is an essential maintenance procedure for Epson M1120 and ET-M1120 printers to ensure smooth printing performance. Over time, the print head nozzles can become clogged, resulting in missing lines or blurred prints. To rectify this issue, Epson provides a convenient and effective solution through head cleaning.
To remove missing lines, start by accessing the printer’s control panel. Press and hold the “Maintenance” button for about three seconds until the power light starts flashing. This will initiate the head cleaning process. Note that it is recommended to connect the printer to a power source to prevent interruption during head cleaning.
The printer will commence head cleaning, which involves ink being pumped through the nozzles to remove any clogs or debris. This process can take a few minutes to complete. Once finished, the printer will automatically print a nozzle check pattern to verify if the missing lines have been resolved.
It’s important to note that excessive head cleaning should be avoided as it can deplete the ink levels significantly. Epson recommends performing head cleaning only when necessary or when instructed by the printer’s software.
Additionally, it is crucial to use genuine Epson ink for optimal print quality and to minimize the occurrence of clogged nozzles. Using compatible or counterfeit inks may not only result in print quality issues but can also void the printer’s warranty.
By following these simple steps and regularly performing head cleaning, users can ensure consistent and high-quality prints from their Epson M1120 or ET-M1120 printers.
Download Epson M1120 Resetter
– Epson M1120 Resetter For Windows: Download
– Epson M1120 Resetter For MAC: Download
How to Reset Epson M1120
1. Read Epson M1120 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson M1120 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson M1120 off then on
5. Check Epson M1120 Counter
How to Remove Missing Lines – Head cleaning (Epson M1120,ET-M1120) NPD6056 on Youtube
– Video How to Remove Missing Lines – Head cleaning (Epson M1120,ET-M1120) NPD6056 on YouTube, as of the current time, has received 57891 views with a duration of 2:01, taken from the YouTube channel: youtube.com/@EpsonVideoManuals.
Buy Wicreset Serial Key For Epson M1120
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Head cleaning is an essential maintenance procedure for Epson M1120 and ET-M1120 printers to ensure smooth printing performance. Over time, the print head nozzles can become clogged, resulting in missing lines or blurred prints. To rectify this issue, Epson provides a convenient and effective solution through head cleaning.
To remove missing lines, start by accessing the printer’s control panel. Press and hold the “Maintenance” button for about three seconds until the power light starts flashing. This will initiate the head cleaning process. Note that it is recommended to connect the printer to a power source to prevent interruption during head cleaning.
The printer will commence head cleaning, which involves ink being pumped through the nozzles to remove any clogs or debris. This process can take a few minutes to complete. Once finished, the printer will automatically print a nozzle check pattern to verify if the missing lines have been resolved.
It’s important to note that excessive head cleaning should be avoided as it can deplete the ink levels significantly. Epson recommends performing head cleaning only when necessary or when instructed by the printer’s software.
Additionally, it is crucial to use genuine Epson ink for optimal print quality and to minimize the occurrence of clogged nozzles. Using compatible or counterfeit inks may not only result in print quality issues but can also void the printer’s warranty.
By following these simple steps and regularly performing head cleaning, users can ensure consistent and high-quality prints from their Epson M1120 or ET-M1120 printers.
Download Epson M1120 Resetter
– Epson M1120 Resetter For Windows: Download
– Epson M1120 Resetter For MAC: Download
How to Reset Epson M1120
1. Read Epson M1120 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson M1120 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson M1120 off then on
5. Check Epson M1120 Counter
How to Remove Missing Lines – Head cleaning (Epson M1120,ET-M1120) NPD6056 on Youtube
– Video How to Remove Missing Lines – Head cleaning (Epson M1120,ET-M1120) NPD6056 on YouTube, as of the current time, has received 57891 views with a duration of 2:01, taken from the YouTube channel: youtube.com/@EpsonVideoManuals.
Buy Wicreset Serial Key For Epson M1120
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien