Reset E-11 Error: the Ink Pad Needs Service – Replacement won’t work!
The ‘E-11’ error message is a common issue that many printer users encounter, specifically related to the ink pad of the printer. When this error occurs, it means that the ink pad is full and needs to be replaced or serviced. However, a replacement ink pad won’t solve the problem entirely. Instead, a reset procedure needs to be followed to resolve the E-11 error.
Printer manufacturers design ink pads to absorb excess ink during the printing process. Over time, these pads can become saturated, causing the printer to display the E-11 error message. The purpose of the ink pad is to prevent ink leakage and ensure printer functionality.
Replacing the ink pad is a temporary solution as it will become saturated again after a certain period of use. Instead of going through the hassle and expense of replacing the ink pad repeatedly, a more effective solution is to reset the printer’s internal counter.
To reset the E-11 error, follow these steps:
1. Turn off the printer and unplug it from the power source.
2. Locate the printer’s reset button or combination of buttons (often found in the printer’s manual or on the manufacturer’s website).
3. Press and hold the reset button for a few seconds while simultaneously plugging the printer back into the power source.
4. Release the reset button once the printer’s screen turns on or after a few seconds.
By following these steps, the printer’s internal counter will be reset, resolving the E-11 error and allowing it to continue functioning without needing a replacement ink pad.
In conclusion, encountering the E-11 error message, indicating that the ink pad needs service, is a common issue for printer users. Instead of immediately opting for a replacement ink pad, resetting the printer’s internal counter is a more effective and cost-efficient solution to resolve the error message.
Download Epson ET-4800 Resetter
– Epson ET-4800 Resetter For Windows: Download
– Epson ET-4800 Resetter For MAC: Download
How to Reset Epson ET-4800
1. Read Epson ET-4800 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-4800 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-4800 off then on
5. Check Epson ET-4800 Counter
Reset E-11 Error: the Ink Pad Needs Service – Replacement won’t work! on Youtube
– Video Reset E-11 Error: the Ink Pad Needs Service – Replacement won’t work! on YouTube, as of the current time, has received 59546 views with a duration of 11:15, taken from the YouTube channel: youtube.com/@BCHTechnologies.
Buy Wicreset Serial Key For Epson ET-4800
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.