If you own an Epson XP Series printer, one of the common maintenance tasks you may encounter is cleaning the ink waste pads. Over time, these pads can become clogged with ink, leading to poor print quality and potential damage to your printer. Fortunately, cleaning the ink waste pads is a relatively simple process that can be done at home. Here’s a step-by-step guide on how to clean ink waste pads on Epson XP Series printers.
1. Start by powering off your printer and unplugging it from the power source to ensure your safety.
2. Open the printer cover to access the ink cartridges. Carefully remove the cartridges and set them aside.
3. Locate the ink waste pads, which are usually located near the printer’s cleaning mechanism. They may be saturated with ink, so be cautious not to touch them directly with your hands.
4. Using rubber gloves or a pair of tweezers, carefully remove the ink waste pads from the printer. Place them on a plastic surface or paper towels to prevent any ink staining.
5. Now it’s time to clean the ink waste pads. You can do this by rinsing them under warm water until the water runs clear. Be gentle during the process to avoid damaging the pads.
6. Once the pads are clean, leave them to dry completely.
7. While the ink waste pads are drying, take the opportunity to clean the printer’s cleaning mechanism using a soft cloth or sponge. Remove any ink residues or debris.
8. Once the ink waste pads are dry, reinsert them back into the printer and secure them in place.
9. Put the ink cartridges back into their respective slots and close the printer cover.
10. Finally, plug the printer back into the power source and power it on. Run a printer cleaning or alignment process to ensure everything is functioning properly.
By following these steps, you can successfully clean the ink waste pads on your Epson XP Series printer and ensure its optimal performance for future printing tasks. Remember to perform this maintenance regularly to prevent any ink-related issues and prolong the lifespan of your printer.
Download Epson XP-352 Resetter
– Epson XP-352 Resetter For Windows: Download
– Epson XP-352 Resetter For MAC: Download
How to Reset Epson XP-352
1. Read Epson XP-352 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-352 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-352 off then on
5. Check Epson XP-352 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52969 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Buy Wicreset Serial Key For Epson XP-352
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.