Resetting the ink chip on an Epson PX1004 printer is a necessary process to ensure efficient printing and continued functionality. Here is a step-by-step guide to help you reset the ink chip on your Epson PX1004 printer.
Firstly, locate the ink cartridges – these are usually found inside your printer. Gently remove them one by one from their designated slots. It’s important to handle them with care.
Next, inspect the ink cartridge carefully and identify the ink chip. The ink chip is a small electronic circuit located on the side of the ink cartridge. Take a note of where each ink cartridge belongs to avoid confusion when reinstalling them later.
Afterward, use a soft cloth or cotton swab to clean the ink chip and the cartridge slots. This will help remove any dirt or debris that may interfere with the reset process.
Once the cleaning is complete, reinsert the ink cartridges back into their slots, ensuring they are correctly positioned. Close the printer cover.
Now, turn on your printer and wait for it to initialize. Proceed to access the printer settings on your computer or device and locate the ink settings or maintenance option.
In the ink settings, select the option to reset the ink chip. Follow the on-screen instructions, and the printer will initiate the reset process.
The printer may ask for confirmation or require you to perform an alignment, so follow the prompts to complete the process. Once the reset is completed, your ink levels should be restored, and you can resume printing as usual.
Resetting the ink chip on an Epson PX1004 printer is a simple procedure that can resolve various ink-related issues. By following these steps, you can reset the ink chip and ensure optimal printing performance from your Epson PX1004 printer.
Download Epson PX-1004 Resetter
– Epson PX-1004 Resetter For Windows: Download
– Epson PX-1004 Resetter For MAC: Download
How to Reset Epson PX-1004
1. Read Epson PX-1004 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson PX-1004 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson PX-1004 off then on
5. Check Epson PX-1004 Counter
Hướng dẫn reset chip mực epson px1004-how to reset ink printer epson px1004 on Youtube
– Video Hướng dẫn reset chip mực epson px1004-how to reset ink printer epson px1004 on YouTube, as of the current time, has received 2523 views with a duration of 6:09, taken from the YouTube channel: youtube.com/@tailieumayintonghop8744.
Buy Wicreset Serial Key For Epson PX-1004
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.