Resetting your Epson EcoTank printer to its factory defaults can be a useful process when you encounter issues with its performance or connectivity. Here, we will guide you through the simple steps required to reset the Epson EcoTank ET-2720, ET-2750, and ET-2760 models.
Firstly, resetting your printer to factory defaults erases all the personalized settings and configurations you’ve made previously. Therefore, it’s important to note down any specific settings, such as Wi-Fi passwords or custom print preferences, that you may want to reconfigure after the reset.
To reset the Epson EcoTank printer, start by turning it off. Next, locate the control panel and press and hold the WiFi and Stop buttons simultaneously for about three to five seconds. While holding these buttons, turn on the printer. Continue holding them until you see the power light flashing, indicating the printer has been reset to its default settings.
After the reset, you will need to run the initial setup process again. Connect your printer to your Wi-Fi network, install the necessary drivers on your computer, and follow the on-screen instructions to align the printhead and perform any other required setup steps.
Remember to reconfigure any specific settings you noted down earlier, such as setting the desired print quality, paper size, or connecting to your mobile devices via the Epson Connect app.
Following these steps will allow you to reset your Epson EcoTank ET-2720, ET-2750, or ET-2760 printer to its factory defaults, resolving any performance or connectivity issues you may have faced. Please note that resetting your printer should be done only when necessary, and it is always recommended to reach out to Epson customer support or consult the printer’s user manual for further guidance.
Download Epson ET-2712 Resetter
– Epson ET-2712 Resetter For Windows: Download
– Epson ET-2712 Resetter For MAC: Download
How to Reset Epson ET-2712
1. Read Epson ET-2712 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2712 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-2712 off then on
5. Check Epson ET-2712 Counter
Reset To Factory Defaults Epson EcoTank ET-2720, ET-2750, ET-2760. on Youtube
– Video Reset To Factory Defaults Epson EcoTank ET-2720, ET-2750, ET-2760. on YouTube, as of the current time, has received 65370 views with a duration of 0:56, taken from the YouTube channel: youtube.com/@CopyPrintScanChannel.
Buy Wicreset Serial Key For Epson ET-2712
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.