Are you experiencing issues with your Epson ME 301 printer, such as an error message indicating that the waste ink pad is full? Don’t worry, there is a solution for this problem! In this article, we will discuss how to reset the waste ink pad counter on your Epson ME 301 printer, providing you with step-by-step instructions.
Firstly, it is important to note that the waste ink pad is a sponge-like material inside your printer that absorbs the excess ink during printing. Over time, this pad may become saturated, leading to an error message stating that it needs to be replaced or cleaned.
To reset the waste ink pad counter on your Epson ME 301 printer, you can follow these simple steps:
1. Download the Epson ME 301 Waste Ink Pad Counter Reset Utility from the official Epson website or other reliable sources.
2. Extract the downloaded file and run the application.
3. Connect your Epson ME 301 printer to your computer using a USB cable.
4. Open the reset utility application and select your Epson ME 301 printer from the list.
5. Click on the “Reset waste counters” button, and the utility will reset the waste ink pad counter.
6. Restart your printer and check if the error message has disappeared.
By following these steps, you should be able to reset the waste ink pad counter on your Epson ME 301 printer successfully. This will allow you to continue using your printer without any interruption or error messages related to the waste ink pad. However, it is important to note that resetting the waste ink pad counter is a temporary solution, and if the pad becomes saturated again, it may need to be replaced or cleaned.
Download Epson XP-301 Resetter
– Epson XP-301 Resetter For Windows: Download
– Epson XP-301 Resetter For MAC: Download
How to Reset Epson XP-301
1. Read Epson XP-301 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-301 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-301 off then on
5. Check Epson XP-301 Counter
Reset Epson ME 301 Waste Ink Pad Counter on Youtube
– Video Reset Epson ME 301 Waste Ink Pad Counter on YouTube, as of the current time, has received 547 views with a duration of 4:42, taken from the YouTube channel: youtube.com/@resetprinter7584.
Buy Wicreset Serial Key For Epson XP-301
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.