If you’re facing any issues with your Epson ET-2760 printer, a factory reset can often fix the problem. A factory reset returns the printer to its original settings, erasing any customizations or configurations you may have made. Follow this easy tutorial to learn how to factory reset your Epson ET-2760 printer.
Firstly, make sure the printer is turned on and connected to your computer or network. Next, locate the “Home” button on the printer’s control panel. Press and hold this button for about 5 seconds until you see the “Settings” option.
Using the navigation buttons on the control panel, scroll down to “Restore Factory Default” and press the OK button. The printer will now prompt you with a warning message. Confirm your selection by selecting “Yes” or “OK.”
The factory reset process may take a few minutes, during which the printer will restart itself. Once the reset is complete, you will need to set up the printer again as if it were new. Follow the initial setup instructions that accompany the printer, such as connecting it to your Wi-Fi network and installing ink cartridges.
After completing the setup, your Epson ET-2760 printer should be back to its original factory settings. If you were experiencing any issues, they should hopefully be resolved now. However, bear in mind that a factory reset will erase any custom settings or configurations you had previously saved. Make sure to back up any important settings or preferences before proceeding with the reset.
By performing a factory reset, you can troubleshoot various issues with your Epson ET-2760 printer effectively. Just remember to carefully follow the steps mentioned in this tutorial to ensure a successful reset.
Download Epson ET-2728 Resetter
– Epson ET-2728 Resetter For Windows: Download
– Epson ET-2728 Resetter For MAC: Download
How to Reset Epson ET-2728
1. Read Epson ET-2728 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2728 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-2728 off then on
5. Check Epson ET-2728 Counter
How To Factory Reset An Epson ET-2760 Printer-Easy Tutorial on Youtube
– Video How To Factory Reset An Epson ET-2760 Printer-Easy Tutorial on YouTube, as of the current time, has received 22455 views with a duration of 2:36, taken from the YouTube channel: youtube.com/@HelpfulDIY.
Buy Wicreset Serial Key For Epson ET-2728
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.