If you own an Epson XP series printer, you may be familiar with a common problem that arises over time – ink waste pads getting filled up. Ink waste pads are an essential part of the printer, as they collect excess ink during the printing process. However, if these pads become saturated, they can cause issues such as poor print quality and even printer malfunction. Fortunately, cleaning ink waste pads on Epson XP series printers is a relatively simple process that can be performed at home.
To start, ensure that your printer is turned off and disconnected from any power sources. Locate the waste ink pads beneath the printer cartridges. It’s usually located towards the back of the printer. Gently remove the pads from the printer and place them on a paper towel or an absorbent cloth.
Next, fill a basin with warm soapy water or a cleaning solution specifically designed for printer maintenance. You can also use isopropyl alcohol as an alternative. Immerse the pads into the solution and let them soak for a few minutes. This will help dissolve and remove the excess ink.
After soaking, gently squeeze the pads to remove any remaining ink and rinse them with fresh water to ensure all the cleaning solution is removed. Allow the pads to air dry completely before placing them back into the printer.
Once the pads are dry, carefully reinstall them back into their original position. Make sure that they are securely in place before turning on the printer and performing a test print. This process should help resolve any print quality issues caused by clogged or saturated ink waste pads.
Regular maintenance is essential to keep your Epson XP series printer functioning properly. Cleaning the ink waste pads should be done periodically to maintain optimal print quality and avoid potential problems. By following these simple steps, you can ensure smooth and crisp prints every time.
Download Epson XP-335 Resetter
– Epson XP-335 Resetter For Windows: Download
– Epson XP-335 Resetter For MAC: Download
How to Reset Epson XP-335
1. Read Epson XP-335 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-335 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-335 off then on
5. Check Epson XP-335 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52969 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Buy Wicreset Serial Key For Epson XP-335
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.