If you own an Epson XP series printer, you may have experienced the frustrating moment when it notifies you about the ink waste pads being full. This means that the printer’s internal ink absorber pads are saturated and need to be cleaned or replaced to ensure optimal performance. Here are some steps to help you clean the ink waste pads on Epson XP series printers.
Firstly, make sure to turn off the printer and unplug it from the power source to avoid any potential damage. Locate the waste ink pads, which are usually found on the right side of the printer. Carefully remove them by following the instructions provided in your printer’s manual or by searching for a tutorial specific to your printer model.
Once the pads are removed, gently wash them with warm water, using your fingers or a soft brush to remove any dried ink or dirt. Avoid using harsh chemicals or excessive force to prevent damage. Allow the pads to dry completely before reinstalling them.
In addition to cleaning the pads, you can also reset the printer’s waste ink counter. This can be done by downloading and running a utility software provided by Epson or by following the instructions in your printer’s manual.
It is important to note that cleaning the ink waste pads is a temporary solution, as they will eventually reach their absorbency limit. If you notice that the pads are becoming saturated again shortly after cleaning, it may be time to consider replacing them.
Regularly checking and cleaning the ink waste pads on your Epson XP series printer will help prolong its lifespan and maintain its high-quality printing performance. It is always recommended to refer to the printer’s manual or contact Epson customer support for specific instructions on how to clean and maintain your printer effectively.
Download Epson XP-322 Resetter
– Epson XP-322 Resetter For Windows: Download
– Epson XP-322 Resetter For MAC: Download
How to Reset Epson XP-322
1. Read Epson XP-322 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-322 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-322 off then on
5. Check Epson XP-322 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52969 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Buy Wicreset Serial Key For Epson XP-322
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien
Leave a Reply
You must be logged in to post a comment.