How to Properly Clean Ink Waste Pads on Epson XP Series Printers
Cleaning the ink waste pads on Epson XP series printers is an important maintenance task that helps ensure the printer’s longevity and optimal performance. Ink waste pads are responsible for collecting excess ink produced during the printing process. Over time, these pads can become saturated with ink, which may result in printer errors and poor print quality. Cleaning the waste pads is a simple process that can be done at home with a few basic tools.
To clean the ink waste pads on Epson XP series printers, follow these steps:
1. Turn off the printer and unplug it from the power source to avoid any accidents.
2. Open the printer cover and locate the waste pad tray. It is usually situated on the right-hand side of the printer.
3. Carefully remove the waste pad tray by sliding it out. Be cautious not to touch any internal parts or electrical connections.
4. Take a clean, lint-free cloth or paper towel and gently blot the waste pads to remove excess ink.
5. If the waste pads are heavily saturated, you can rinse them under warm running water until the water runs clear. Allow them to air dry completely before reinstalling.
6. Once the waste pads are dry, carefully slide the tray back into the printer and ensure it is securely in place.
7. Close the printer cover and plug it back into the power source.
8. Turn on the printer and run a nozzle check or print head cleaning to ensure proper functionality.
Regularly cleaning the ink waste pads on your Epson XP series printer will help maintain its performance and prevent potential issues. It is recommended to clean the waste pads every 6 to 12 months or as needed. Remember to always refer to the printer’s manual for specific instructions.
Download Epson XP-310 Resetter
– Epson XP-310 Resetter For Windows: Download
– Epson XP-310 Resetter For MAC: Download
How to Reset Epson XP-310
1. Read Epson XP-310 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-310 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-310 off then on
5. Check Epson XP-310 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52969 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Buy Wicreset Serial Key For Epson XP-310
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien